■ 제품필수정보

제조사	Richco
제조사품명	LCBSB-12-01 ART
간략설명	LCBSB-12-01 ART, 19.1mm High Nylon PCB Support for 4mm PCB Hole, 17.8 x 17.8mm Base

■ 제품사양

PCB Support
타입 = Adhesive-Backed Support Body
높이 = 19.1mm Support Base
크기 = 17.8 x 17.8mm PCB Hole Diameter = 4mm PCB Thickness = 1.57mm Material = Nylon Support Base Length = 17.8mm Support Base Width = 17.8mm Standard Adhesive Backed Supports. PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting The board to be supported is retained securely by the locking barb, but may be removed when required The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels Working temperature range: -20°C to +90°C
색상 is natural PCB Thickness 1.6mm Hole dia 4.0mm