■ 제품필수정보

제조사	Phoenix Contact
제조사품명	2868651
간략설명	Phoenix Contact STEP-PS/1AC/24DC/2.5 Switch Mode DIN Rail Power Supply, 85 ??264V ac ac Input, 24V dc dc Output,

■ 제품사양

AC or DC Input Voltage = ac AC or DC Output Voltage = dc Input Voltage = 85 ??264V ac Output Voltage = 24V dc Output Current = 2.5A Power Rating = 60W Number of Outputs = 1 Electrical Phase = 1
타입 = Switch Mode
높이 = 90mm
장착형태 = DIN Rail Mount Minimum Temperature = -25°C UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved. STEP POWER Single Phase Power Supplies. The new STEP POWER generation of compact power supply units is particularly suitable for installation distributors and flat control panels thanks to its design. Their high degree of efficiency and the low standby losses make for high power efficiency. Features and benefits:. Easy mounting on the rail and wall Maximum energy efficiency through small losses Fast commissioning with LED function monitoring High operational safety by long power failure under full load Worldwide use by wide-range intake and international approval package Wide temperature range from -25 ° C to +70 ° C Parallel switched to increase performance and redundancy. Typical applications:. The design of the PSUs makes them suitable for installation distributors and flat control panels. More specifically, these STEP POWER PSU's have been designed to cater for building automation applications. How to install a DIN Rail Power Supply?. DIN rail power supplies typically feature an easy install. With the ability to mount it onto a compatible DIN rail, all you usually have to do is slide it onto one. These STEP DIN rail power supply's support NS 35 (EN 60715) rails. Once you've slid your power supply onto your rail, it is then a case of connecting your cables into the relevant inputs and outputs. Wires must be stripped 6.5mm before inserting into the terminal blocks. The terminal blocks are an effortless screw connection, making your install simple. What is a DIN rail power supply?. Effectively, a DIN rail power supply is a power supply, that is designed to be put on a DIN rail. These power supplies cater to the industrial world, rather than consumer electronics. They feature different connection methods such as terminal block connections rather than your typical 3-pin socket power. DIN Rail PSU's are designed to sit inside cabinets and work hand-in-hand with providing higher efficiency for industrial applications.