■ 제품필수정보

제조사	Testec
제조사품명	TT-SI 9010
간략설명	Testec SI Series TT-SI 9010 Oscilloscope Probe, Active, Differential Type, 70MHz, 1:100, 1:1000, 5kV Max

■ 제품사양

Probe
타입 = Active, Differential Attenuation = 1:100, 1:1000 Bandwidth = 70MHz Maximum Common Mode Input Voltage = 5kV Connector
타입 = BNC Model Number p = TT-SI 9010 Number of Probes = 1
시리즈 = SI Safety Category = CAT I 2500 V, CAT II 7000V Rise Time = 5ns Testec oscilloscope probesThe Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±2500V AC and 7000VAC/DC. It supports bandwidths up to 70MHz. Supplied with: Probe 4 x AA batteries 2 x Grabbers red & black Instruction manual Factory calibration certificateFeatures and BenefitsBandwidth is DC to 70MHz Attenuation is 1:100/1:1000 Rise time is 5ns Differential mode input voltage is 1:100 ±700V (DC+peak AC) or 700Vrms 1:1000 ±7000V (DC+peak AC) or 5000Vrms Input impedance is 10Mohm ll10pF each side to ground Common mode voltage range is 1:100 and 1:1000 ±7000V (DC+peak AC) or 2500Vrms Non-destructive max. input voltage is 1:100 and 1:1000 ±7000V (DC+peak AC) or 2500Vrms CMRR (typical) is -80dB at 50Hz and -60dB at 20kHz Offset (typical) is <±5mV Noise (typical) is 0.9mVRMSApplicationsPerformance conversion Inverters Motor speed indicators Switch mode power supplies CertificationsCAT I 2500 VAC CAT II 7000 VAC/DC