■ 제품필수정보
| 제조사 |
Wago |
| 제조사품명 |
750-315 / 300-000 |
| 간략설명 |
Wago Coupler for use with I/O Modules |
■ 제품사양
Accessory
타입 = Coupler For Use With = I/O Modules Wago MODBUS Fieldbus CouplerThe Wago Modbus Fieldbus coupler, RS 485/1,2 - 115,2k Baud allows connection of the WAGO-I/O-SYSTEM as a slave to the MODBUS or Fieldbus. It recognizes all the connected I/O modules and creates a local process image on this basis. Analogue and speciality module data is sent via words and/or bytes, digital data is sent bit by bit. It allows the storage of the process image in the corresponding Master control (PLC, PC or NC). Couplers series 750 Wago I/O system Range of couplers for analogue and digital signals Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus Configuration simplified with switches or rotary encoders The joint should be connected to the end of the loop, to guarantee the correct transmission of the data and enable the whole assembly to function correctly Wago I/O system range Remote I/O modular system for all functions Makes it easier to connect all I/Os thanks to its cage clamp system Communication with PC, PLCs because of the various communication protocols
색상 codes according to the type of signalFeatures and BenefitsDIN 35 rail, cage clamp connection Maximum number of I/O modules is 64 DIP switch and 2 decimal coder configuration Voltage supply is 24VDC Input current maximum is 500mA at 24V Isolation is 500V system/supply Operating temperature ranges between 0°C and 55°CCertificationsIP20 rated CE EN 50082-2 (1996), EN 50081-1 (1993) cULus approved IEC 60068-2-6 IEC 60068-2-27
