■ 제품필수정보

제조사	Fluke
제조사품명	80PR/60
간략설명	Fluke RTD Needle Temperature Probe, 90mm Length, 4.8mm Diameter, +260 °C Max

■ 제품사양

Sensor
타입 = RTD Probe Tip
타입 = Needle Probe Length = 90mm Probe Diameter = 4.8mm Maximum Temperature Measurement = +260 °C Cable Length = 1m Best Accuracy = ±1 °C Connector
타입 = 3.5 mm Model Number = 80PR-60 Durable hard case; 9V alkaline battery; operating instructions. Fluke 63IR and Contact Thermometer. The Fluke 60 series IR thermometer is excellent for jobs requiring temperature measurement in hard-to-reach, hot, rotating, or dangerous situations. Get accurate readings over a broad range of temperatures -40°C to 760°C (-40 °F to 1400 °F). The enhanced optics allow you to measure smaller objects further away. All with a comfortable and easy to use handheld device.. Features and Benefits:. Laser guide Back-lit display 0.95 emissivity Selectable °C or °F Expanded measurement range up to 535 °C (999 °F) High accuracy: 1 % and repeatability: 0.5 %. FEATURES and BENEFITS:. Are infrared thermometers dangerous?. Laser guided sighting system for easy targeting. Backlit display. High resolution optics. 0.95 emissivity. Selectable °C or °F. Maximum temperature display. Expanded measurement range up to 535 °C (999 °F). High accuracy: 1 % and repeatability: 0.5 %. IR thermometers are not harmful, they do not emit radiation, only measure it like a digital camera. Fluke 66 Additional Features:. The majority of IR thermometers have a measurement error specification, which shows their best accuracy. The surface being measured can also affect accuracy. Reflective objects result in lower measurements than the actual temperature, whilst non-reflective surfaces give higher measurement. The emissivity of a surface is how effective it is at emitting energy as thermal radiation, as such some IR thermometers have adjustable emissivity settings. Distance to spot ratio is also essential in providing accurate temperature measurements, if an infrared thermometer is too close to its target area, heat can build up in the device. This can give false readings or damage the temperature sensors, therefore it is essential to always follow a manufacturers guidelines. Min/Max/Avg/Dif readings. Data logging up to 12 points. Hi/Lo alarms. Adjustable emissivity from 0.1 to 1.0 in 0.01 steps