■ 제품필수정보

제조사	RS PRO
제조사품명	DOF6.3-6LT
간략설명	RS PRO Uninsulated Female Spade Connector, Receptacle, 6.35 x 0.8mm Tab Size, 4mm² to 6mm²

■ 제품사양

타입 = Receptacle Minimum Wire Size mm² = 4mm² Maximum Wire Size mm² = 6mm² Tab Size = 6.35 x 0.8mm
단열재 = Uninsulated Minimum Wire Size AWG = 12AWG
종료 방법 = Crimp
접촉 재료 = Brass Contact
도금= Tin
시리즈 = DOF6.3 Tooling to suit In-line Receptacles and Blades is available - see stock no. ; 492-9595 492-9595 and appropriate die sets ; 492-9668 492-9668 , ; 492-9674 492-9674 or ; 492-9680 492-9680. In-Line Receptacles. From RS PRO a high-quality open barrel crimp receptacle terminal sometimes known as a female quick disconnect. Female crimp receptacles are a type of electrical wiring connector which, when mated with a male tab connector (or male quick disconnect), provide a fast and reliable interconnect between two wires. The body of the connector is made from brass with a tin plating. The tin plating has excellent conductivity and is also resistant to corrosion. Receptacles are available in 3 widths to fit 0·5 or 0·8mm blades, stock nos. ; 488-1235 488-1235 mates with ; 488-1279 488-1279. How Does a Female Crimp Connector Work?. The female connector or receptacle is crimped onto the end of the stranded electrical wire using the appropriate tooling, no solder is required. The male tab or blade connector on the opposing wire simply slots into the opening on the end of the receptacle to form a secure and reliable electrical connection. Features and Benefits. Allows easy connection and disconnection of two wires Provides a secure and permanent electrical connection Solderless crimp connection Tin plating for resistance to corrosion, added strength and excellent conductivity. Applications. These female connectors are used in a wide range of industries including industrial, automotive and consumer industries. Applications include:. Industrial control systems Industrial machines Automotive applications Communication equipment Power supplies HVAC Domestic appliances including dishwashers, washing machines and dryers. Selecting the Correct Connector Size. When selecting the right terminal for your application, you should consider the following: The wire size 'mm' (metric) or 'AWG' (American Wire Gauge) you are using The tab size to which you will be connecting the ring terminal. The width of the receptacle has to match the width of the tab it is mating with and vice versa. The width is usually shown as a series name in inches, the most common ones being .110 (2.8mm), .187(4.8mm), .205(5.2mm), .250 (6.3mm), .375 (9.5mm). The thickness of the tabs can also vary and are usually 0.51 or 0.81mm. How to Crimp a Receptacle Connector. Strip the end of the wire and cut it to the same length as the terminal. Insert the stripped end into the barrel making sure no bare wire is visible. The connector is then ready to be crimped on to the end of the wire. Pliers or a ratchet tool can be used but, for a better quality crimp, it is better to use a ratchet crimping tool. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed which will prevent partial crimps. Insert the barrel of the receptacle terminal into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. The crimped receptacle terminal is now ready for mating with a male tab terminal to form a secure electrical connection.