■ 제품필수정보

제조사	NEUTRAL
제조사품명	DIN 94
간략설명	1025 piece Plain Stainless Steel Metric Cotter Pin Kit A2 304

■ 제품사양

Pin
타입 = Cotter System of Measurement = Metric Number of Pieces = 1025 Material = Stainless Steel Stainless Steel
타입 = A2 304 Finish = Plain Diameter Largest = 4mm Diameter Smallest = 1.6mm Length Longest = 50mm Length Shortest = 25mm Conforms to DIN94. Stainless Steel Split Pin Kit. RS PRO metric cotter pin kit contains 1025-piece of pins, made of A2 grade stainless steel with plain finish. Each cotter pin conforms to DIN94 standards. These pins are a type of mechanical fastener that can hold assemblies together and are easy to install and remove and offer a reliable fastening solution for light-duty applications. Cotter pins (also known as a split pins or cotter key) are metal fasteners that are bent during installation to lock it in place. Typically made of thick wire with a half-circular cross section, split pins come in multiple sizes and types. Cotter pins are a flat metal that is open on one end and folded to a small eyelet at the opposite end. The open end of the pin is bent apart, locking it in place when inserted into hole. When removed they are designed to be discarded and replaced, because of fatigue from bending. Features and Benefits:. Manufactured from A2 grade stainless steel. Kit Contents (Pin dia. x Length x Qty): 1.6 dia. x 25 mm x 75 2 dia. x 20 mm x 100 2.5 dia. x 20 mm x 50 2.5 dia. x 25 mm x 100 2.5 dia. x 40 mm x 75 3.2 dia. x 25 mm x 150 3.2 dia. x 40 mm x 75 3.2 dia. x 50 mm x 100 4 dia. x 25 mm x 75 4 dia. x 40 mm x 50 4 dia. x 50 mm x 75. Typical Application:. Cotter pins or split pins are a light-duty type of basic metal fastener, often found holding shafts and similar components in place, or keeping machinery aligned. They feature an eyelet to enable various attachments, and generally require the use of pliers or other manipulating tools to bend out the two separate tines of the pin once it has been inserted through a suitably sized hole. These pins can be used for the following: Keep machine parts in proper alignment Attaching lightly loaded pulleys and gears to shafts Used to fasten metal together, for example: staple or rivet. Why RS PRO? RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they ??re only given the RS PRO seal of approval if we ??re confident of their exceptional quality, which means you can be confident too.