■ 제품필수정보

제조사	Schneider Electric
제조사품명	XPSCM1144
간략설명	Schneider Electric XPS CM Series Light Beam/Curtain Safety Relay, 24V dc, 2 Safety Contact(s)

■ 제품사양

Supply Voltage = 24V dc Safety Contacts = 2 Function = Light Beam/Curtain Auxiliary Contacts = 4 Range = Preventa Safety Category ISO 13849-1 = 2 PL ISO 13849-1 = c SIL IEC 61508 = 1 Terminal
타입 = Screw Performance Level = c This product is supplied with a full installation instruction manual which should be strictly adhered to. Particular attention should be given to section 3.5 (installation positioning and electrical inter-phasing). XU2 S,
타입 2, Single Beam System. The XPS-CM safety module, used in conjunction with the single beam XU2S safety light devices, constitutes a type 2 safety light curtain conforming to IEC 61496-1. Features. Flexibility allows connection of up to 4 light beam devices which can protect a zone up to 1200mm high and 8m wide (EN999) Automatic self-checking every 5ms Built in muting function allows the light device to be inhibited by an external sensor Single beam sensors (for muting function) available separately Ideal for transfer line applications Solid state auxiliary output (from module) PNP 20mA/24Vdc 2 N/O safety outputs. These safety modules can be used in conjunction with the Harmony XY2SB range of two-hand control stations. What Safety Relay should I use with a Two Hand Control Station?. Safety modules XPS BA, BC and BF may be used for two-hand control stations in order to comply with the requirements of European standard EN 574/ISO 13851 for two-hand control systems. XPSCM1144 Features and Benefits. ;ul> ;li>Telemecanique safety module XPSCM. ;/li> ;li>For monitoring Single Beam photo electric sensor. ;/li> ;li>Built-in muting. ;/li> ;li>Inputs ??2 x terminals MA, MB for muting function, 4 x terminals Z1, Z2, Z3, Z4 ??for the sensor. ;/li> ;li>Input voltage of 24 V dc (sensor), 24 V dc (muting) terminals U+, U-. ;/li> ;li>Input capacity - XC limit switch for muting function, XU2M18PP340 for muting function, XU2S18PP340 (infrared) for sensor, XU9M18PP340 for muting function. ;/li> ;li>Captive screw clamp terminals. ;/li> ;li>2 NO output, volt free (13-14, 23-24). ;/li> ;li>Rated supply voltage 24 V dc. ;/li> ;li>Sensor power supply U+, U- / 24 V dc. ;/li> ;li>Sensor supply current 200 MA. ;/li> ;li>Maximum muting duration of 60 s (-10 ??30%). ;/li> ;li>Line resistance 10 Ohm for sensor power supply (maximum). ;/li> ;li>Output current 10 MA (relay). ;/li> ;li>Output voltage 17 V (relay) minimum. ;/li> ;li>25 Ms response time (maximum) on input open. ;/li> ;li>LEDs - 1 LED, function electronic internal fuse status, 1 LED, function restarting, 1 LED, function safety outputs closed, 1 LED, function safety outputs open, 1 incandescent lamp, function muting power consumption: 4 - 6.5 W. ;/li> ;li>15 W Maximum power consumption. ;/li> ;li>Electronic internal fuse. ;/li> ;/ul>. IP Protection. ;ul> ;li>IP20 (terminals) conforming to IEC 60529. ;/li> ;li>IP40 (enclosure) conforming to IEC 60529. ;/li> ;/ul>. Safety. ;ul> ;li>Can reach category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1. ;/li> ;li>Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061. ;/li> ;li> Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1 ;/li> ;/ul>. Safety Reliability. ;ul> ;li>MTTFd = 16.6 years conforming to EN/ISO 13849-1. ;/li> ;li>DC = 95.5 % conforming to EN/ISO 13849-1. ;/li> ;li>PFH = 3.12E-7 1/h conforming to EN/IEC 61508. ;/li> ;li>PFHd = 3.12E-7 1/h conforming to EN/IEC 62061. ;/li> ;/ul>