■ 제품필수정보

제조사	RS PRO
제조사품명	4300-1355
간략설명	RS PRO Hand Ratcheting Crimping Tool for BNC

■ 제품사양

시리즈 = KCC 1113S Crimp Connector
타입 = BNC Ratcheting = Yes
전체 길이 = 255 mm Pressmaster KCC1113S Coaxial Crimp Tool. The KCC 1113S is an ergonomic hand crimp tool for BNC and TNC coaxial cable connectors. Producing 5.41 mm, 6.48 mm, 1.69 mm/.255'', 0.213'', 0.067'' hexagon shaped crimps, with the minimum of effort, either right or left handed. Suitable for the following cables: RG108A/U, RG142B/U, RG210/U, RG223/U, RG302/U, RG58C/U, RG59B/U, RG62A/U, RG62B/U, RG71B/U Features and Benefits: Non-slip main handle and low friction moving handle ensure a comfortable hand grip Provides two-hand grip in the final phase of crimping, increasing comfort and productivity Unique mechanism significantly reduces hand force requirement over competing for crimping tools The non-slip pad holds the tool in place when using on a work surface Full cycle crimp mechanism to ensure consistent, reliable crimp Ratchet release mechanism to clear miscrimps and obstructions Precision eccentric adjustment for consistent performance and ability to calibrate Hole in handle allows attachment of safety strap for working overhead Each tool has a unique serial number for traceability Durable: lifespan exceeds 50000 cycles High strength, through hardened alloy Swedish steel construction Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ??s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.