상품이미지
  •  상품이미지
  •  상품이미지

MPN : AD-1377CRMPTOL3CVT-CS2065

TE Connectivity AD Hand Ratcheting Crimping Tool for MiniSeal Splices, 0.15 3.37mm² Wire
  • 브랜드

    TE Connectivity

  • 무원상품코드

    M011849006891

  • 타입별
    EA
  • 주문가능수량

    품 절

  • 최소주문수량1
  • 판매단위1
  • 제품정보
  • 배송정보
    (영업일 기준)
  • 특이사항
구매수량 :

*대량구매해택
  • 수량단가1 : 1개 ~ 604,203원

  • 수량단가2 : 5개 ~ 543,779원


총금액
(VAT 별도)

  • 상품정보
  • 상품후기
  • 상품문의
  • 배송/AS안내

■ 제품필수정보

제조사 TE Connectivity
제조사품명 AD-1377CRMPTOL3CVT-CS2065
간략설명 TE Connectivity AD Hand Ratcheting Crimping Tool for MiniSeal Splices, 0.15 3.37mm² Wire

■ 제품사양


시리즈 = AD Crimp Connector
타입 = MiniSeal Splices For Use With = Splices 10-22 AWG Wire Size mm² = 0.15 3.37mm² Ratcheting = Yes MIL-DTL-22520/37-01. TE Connectivity Mil Spec AD-1377 Hand Crimping Tool for MiniSeal Splices. The Importance of a High-Quality Crimp. When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage. TE Connectivity MiniSeal Handing Crimping Tool - Overview. From TE Connectivity, an easy to use hand operated crimping tool made from high-quality materials which meets Mil Spec MIL-DTL-22520/37-01 for crimping MiniSeal crimp splices. The crimping tool consists of handles and two crimping jaws. The crimping jaws contain three crimping chambers with clearly marked wire sizes. A locator helps position the terminal accurately during the crimping process. The crimping tool is supplied with a pre-set crimp depth to ensure that the correct combination of tensile strength and insulation integrity is achieved when crimping. A ratchet controlled release mechanism ensures that the handles of the crimp tool do not release until a full crimp cycle is achieved. Key Features and Benefits. Easy to use with a smooth operation Meets Mil Spec MIL-DTL-22520/37-01 standard Pre-set crimp depth ensures crimp integrity Ratchet controlled release mechanism ensures full crimp cycle Locator for accurate contact positioning Crimping cavities are polished for maximum crimping reliability Ergonomic design for operator comfort. Questions and Answers. What terminals can this tool be used with? This hand crimping tool is used for crimping MiniSeal splices with a wire size range of 26 AWG to 12 AWG

순번
분류
제목
작성자
날짜
데이터 없음 ...
순번
답변 상태
제목
작성자
날짜
1
신청 접수
2024-11-01
2
신청 접수
2024-10-31
3
답변 완료
2024-10-24
4
신청 접수
2024-10-21
5
신청 접수
2024-05-27
7
답변 완료
2024-05-13
8
답변 완료
2024-04-16
9
답변 완료
2023-12-08
10
답변 완료
2023-11-21
상품정보이미지