■ 제품필수정보
■ 제품사양
Splice
타입 = Butt Minimum Wire Size mm² = 0.5mm² Maximum Wire Size mm² = 1.5mm² Diameter = 1.8mm
단열재 = Uninsulated
접촉 재료 = Copper Contact
도금= Tin Butt. RS PRO selection of butt connectors designed for crimping electrical wire and suit cables from 0·5mm² to 1·5mm² and 1·0mm² to 2·5mm². These terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another and are ideal for repairing, changing and lengthening electrical circuits making them a great addition to any electrician's tool kit. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level. Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires. Options include: ; 433-078 433-078 - Butt Splice Connector, 0.5 to 1.5 mm² ; 208-2688 208-2688 - Sheet formed butt pin terminal, Butt Splice Connector, 1 to 2.5 mm² For basic plier action tool, see stock no. ; 534-806 534-806 RS PRO have a great range of insulated and non-insulated crimp butt splice terminals which are easy to terminate and are suitable for various applications. Features:. Uninsulated Contact material is copper Contact plating is tin. Typical Applications:. Butt splice crimp terminals are used in a wide range of industrial, commercial and domestic applications. They can be found almost anywhere where an electrical connection is required. Some of the most common are Industrial control systems Automotive and transportation sector Machine building Electrical and electronic equipment Commercial and domestic appliances. FAQs Is there a crimp tool that you can use for crimping the butt connectors? Any good quality ratchet style crimp tool or plier tool designed for butt terminals would suffice. RS PRO offers a range of reliable, cost-effective tools. See typical part number 534-806. What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. Why RS PRO? RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they ??re only given the RS PRO Seal of Approval if we ??re confident of their exceptional quality, which means you can be confident too.
