■ 제품필수정보

제조사	Fluke
제조사품명	0665091
간략설명	Fluke 705, 24mA Loop Calibrator

■ 제품사양

Absolute Maximum Current Measurement = 24mA Best Accuracy = ±0.025 % Resolution = 0.001 mA Safety Category = CSA C22.2 Battery
타입 = A, AA Battery Life = 18 h Power Source = Battery
무게 = 350g
높이 = 164mm Length = 47mm
최대 작동 온도 = +55°C
최소 작동 온도 = -10°C Width = 75mm 9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand?? instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data. Fluke 705 Loop Calibrator. Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool. Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips. Features and Benefits:. 0.02% accuracy 24 V loop supply with mA measure Simultaneous mA and % of span display Selectable step/ramp outputs mA sourcing, simulation and measurement Compact case and protective holster Quick battery replacement. FAQ's. What is a current loop calibrator?. Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics. How much current flows in each loop of a parallel circuit?. Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.