■ 제품필수정보

제조사	Werma
제조사품명	840.085.00
간략설명	Werma 840 Series Terminal unit, 24 V dc, 230 V ac, AC, DC, IP54

■ 제품사양

Range = KombiSIGN 70
시리즈 = 840 Component
타입 = Termination Current
타입 = AC, DC Supply Voltage = 24 V dc, 230 V ac
높이 = 30.5mm Base Diameter = 70mm Minimum Temperature = -20°C UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 71. Stacking Signal Tower - KombiSIGN 70, 70mm, IP54. The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP54 for use in normal conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity