상품이미지
  •  상품이미지

MPN : NH 6.4MM C WHT

RS PRO Halogen Free Heat Shrink Tubing, White 6.4mm Sleeve Dia. x 1.2m Length 2:1 Ratio
  • 브랜드

    RS PRO

  • 무원상품코드

    M011718006296

  • 타입별
    BG
  • 주문가능수량

    1,574

  • 최소주문수량1
  • 판매단위1
  • 제품정보
  • 배송정보
    (영업일 기준)
  • 특이사항
구매수량 :

*대량구매해택
  • 수량단가1 : 1개 ~ 5,505원


총금액
(VAT 별도)
  • 상품정보
  • 상품후기
  • 상품문의
  • 배송/AS안내

■ 제품필수정보

제조사 RS PRO
제조사품명 NH 6.4MM C WHT
간략설명 RS PRO Halogen Free Heat Shrink Tubing, White 6.4mm Sleeve Dia. x 1.2m Length 2:1 Ratio

■ 제품사양

Sleeve Diameter = 6.4mm Shrunk Diameter = 3.2mm
색상 = White Sleeve
타입 = Heat Shrink Adhesive Lined = No Shrink Ratio = 2:1 Sleeve Length = 1.2m Material = Polyolefin Flame Retardant = Yes Halogen Free = Yes E 1042-A6-March 2002, IEC 60684-3-216 type C, DEF Stan. 59-97 issue3
타입 8, BS3G 198 part 3 type 15. Heatshrink Tubing 2:1. New harmonized colours available in all sizes to support IEE regulations on phase colours to BS 7671, used as an over sleeve this product can also up-grade your cables to meet the latest fire safety standards as well.,Zero Halogen Heatshrink that exceeds the requirements of London Underground and the MOD and is recommended were fire safety is of prime importance. Areas such as public buildings, public transport, underground rail systems, submarines, hospitals and airports, etc. Highly flame retardant with a flame temperature index of over 350°C Totally halogen free Very low smoke, meets LUL requirements No toxic fume emission High Oxygen index, over 40% Ideal for use in insulation, cable protection, cable identification, and encapsulation on connectors Used as a cover to up-grade cable to meet full fire safety standards Supplied in cut lengths of 1.2m. What is Heat Shrink Tubing?. Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to protect and insulate the connection. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Larger shrink ratios are required to cover materials with a greater size variation. Features and Benefits of Flexible Polyolefin Heat Shrink Tubing. Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially to half its original diameter hence the ratio of 2:1. This flexible Polyolefin tubing has the following properties:. Very flexible 2:1 shrinkage ratio, shrinks to half its original diameter Halogen-free with reduced acid gas emission and smoke generation Excellent flame retardancy Operating temperature range of -55 to +105°C Shrink temperature of 115°C minimum Excellent electrical insulation properties Resistant to common fluids and solvents. What is Polyolefin Heat Shrink Tubing Used For?. This polyolefin halogen-free heat shrink is very versatile and is used in both commercial and industrial applications. The halogen-free material means it is ideal for use in smoke sensitive areas such as public buildings, underground systems, hospitals, airports and submarines. Heat shrink tubing is used for protecting and sealing cable joints and in-line components such as disconnect terminals and wire splices. It can also be used to carry out repairs on existing worn or torn cable or wiring insulation. Applications include the following:. Electrical insulation and protection of resistors and capacitors Environmental protection against moisture, dust, and chemicals. Mechanical protection to wires and small parts from abrasion Mechanical strain relief on cable and connector joints to prevent damage caused by flexing or bending Bundling and organizing harness wires, cable, and tubing
색상 coded identification of cables, wires, and components. How to use Heat Shrink Tubing. The diameter of the wire or cable is measured and the correct sized heat shrink tubing selected. A piece of the tube is cut to size which is long enough to cover the connection or joint after heating. This then slides onto the wire. After the cable or wire has been joined the piece of heat shrink shrinkable tube is moved over the joint and heated with a heat gun until it shrinks and forms a tight wrapping around the joint.

순번
분류
제목
작성자
날짜
데이터 없음 ...
순번
답변 상태
제목
작성자
날짜
1
신청 접수
2024-11-01
2
신청 접수
2024-10-31
3
답변 완료
2024-10-24
4
신청 접수
2024-10-21
5
신청 접수
2024-05-27
7
답변 완료
2024-05-13
8
답변 완료
2024-04-16
9
답변 완료
2023-12-08
10
답변 완료
2023-11-21
상품정보이미지