■ 제품필수정보

제조사	West Instruments
제조사품명	N6600Z210002
간략설명	West Instruments N6600 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 1 Output Relay, 24 ??48 V ac/dc Supply

■ 제품사양

Output
타입 = Relay Supply Voltage = 24 ??48 V ac/dc Size = 48 x 48 (1/16 DIN)mm Number of Outputs = 1
최소 작동 온도 = 0°C
최대 작동 온도 = +55°C Display
타입 = LED, Multi Line IP Rating = IP20, IP66 Range = P 6600 Panel Depth = 120mm UL recognised. West N6600 Temperature Controller. The West N6600 is a 1/16DIN controller that is designed specifically to provide quality process control for the Plastics Extrusion Market. This control features a special Heater Break Alarm Function which works similar to an amp meter, but alerts the operator to heater failures when they occur and prior to production problems. Quick Transfer is a one shot operation which automatically sets the alarm condition for the heater break and is based on the nominal current value. Quick Transfer allows for the automatic entry of setpoints for the heater break alarm. In addition, the Auto/Manual key can be configured for fast access to display amps or process temperature by a single key stroke. Soft Start prevents premature heater failure due to high levels of moisture in heaters at start-up. Soft Start is included on this control, and is used to dry heaters out prior to production. Soft-start is used in injection molding hot runner and other cartridge heater applications. The N6600 controller incorporates our advanced tuning algorithms, with selectable pre-tune and self-tuning. The pre-tune is used on start-up and is a one-step tuning algorithm designed to get you to setpoint fast with self-tuning being enabled near setpoint and normal operating conditions to control overshoot. The self-tune is a continuous tuning algorithm or sometimes referred to as adaptive tuning. This control can also be manual fine-tuned for specific applications. Four outputs, one sensor input, one current transformer input, plus RS-485 communications option Heater break alarms reduce scrap and improve quality by detecting heater loss prior to production problems Two standard tuning algorithms: Pre-tune for fast start-up and Self-tune adaptive tuning Quick transfer automatically sets heater break alarm conditions based on the nominal current value Soft Start prevents premature heater failure due to high levels of moisture in heaters at start-up