■ 제품필수정보
| 제조사 |
Eaton |
| 제조사품명 |
034128 T0-3-8342/V/SVB |
| 간략설명 |
Eaton 6P Pole Panel Mount Isolator Switch - 20A Maximum Current, 6.5kW Power Rating, IP65 |
■ 제품사양
Number of Poles = 6P Maximum Current = 20A
장착형태 = Panel Mount IP Rating = IP65 Power Rating = 6.5kW Voltage Rating = 415V ac Accepts Padlocks = Yes Normal State Configuration = NO Switch Rating = 320A Length = 65mm Width = 65mm Depth = 105mm Throw Configuration = Single Eaton Non-Fused Switch Disconnectors - T0
시리즈 Rotary Switches. The T0 series of switch disconnectors from Eaton are compact and robust. Rotary Cam Switches can be used for many switching and control applications, for example as ON-OFF, main, main/control, or instrument switches. The device consists of a hand actuator, the switch unit and the mounting accessories. This range of isolator switches is also suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches. With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 20 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences. Performs local isolation, manual override ; safety switch functions T0
시리즈 fit a standard front plate of 45 x 45 mm For spare rotary thumb stick (black) see stock no. ; 176-9759 176-9759 For Shaft Extension Kit see stock no. ; 323-173 323-173. What is the difference between a fused switch disconnector and a non-fused switch disconnector?. Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
