■ 제품필수정보
제조사 |
SKF |
제조사품명 |
HK 1015 |
간략설명 |
SKF HK 1015 10mm I.D Needle Roller Bearing, 14mm O.D |
■ 제품사양
Inside Diameter = 10mm Outside Diameter = 14mm Roller Bearing
타입 = Needle Race Width = 15mm Bore
타입 = Parallel Material = Steel Static Load Rating = 9kN Cage Material = Sheet Steel
행 수 = 1 Roller Material = Steel Dynamic Load Rating = 6.6kN End
타입 = Open Reference Speed = 18000rpm Limiting Speed = 20000rpm The SKF drawn cup needle roller bearings have a deep drawn, thin-walled outer ring. Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. These bearings are mounted with a tight interference fit in the housing. That enables a simple and economic design of the housing bore, as shoulders or snap rings are not required to locate the bearing axially. The drawn cup of hardened steel and the needle roller and cage assembly of these bearings form a non-separable unit.Accommodate heavy axial loads and peak loads The very small diameter deviation of the rollers within one assembly enables these bearings to accommodate heavy axial loads and peak loads. Extended bearing service life To prevent stress peaks, the roller ends are relieved slightly to modify the line contact between the raceway and rollers.