■ 제품필수정보

제조사	SKF
제조사품명	320/28 X
간략설명	SKF 320/28 X 28mm I.D Taper Roller Bearing, 52mm O.D

■ 제품사양

Inside Diameter = 28mm Outside Diameter = 52mm Roller Bearing
타입 = Taper Race Width = 16mm Bore
타입 = Parallel Material = Metal Static Load Rating = 38kN Cage Material = Sheet Metal
행 수 = 1 Dynamic Load Rating = 39kN End
타입 = Open Reference Speed = 10000rpm Limiting Speed = 13000rpm Fatigue Limit Load = 4kN The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.Low friction Enhanced operational reliability Rigid bearing application A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved. Running-in period with reduced temperature peaks Separable and interchangeable The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.