■ 제품필수정보

제조사	RS PRO
제조사품명	OJSSDM4815
간략설명	RS PRO Stainless Steel Blind Rivet, 4.8mm

■ 제품사양

Rivet
타입 = Blind Rivet Diameter = 4.8mm Rivet Length = 15mm Fixing Hole Diameter = 4.9mm Rivet Body Material = Stainless Steel Mandrel Material = Stainless Steel Thickness of Material Minimum = 6.5mm Thickness of Material Maximum = 10mm
색상 = Grey Finish = Plain Stainless Steel
타입 = A2 304 RS PRO Dome Head Multigrip Blind Rivet RS PRO introduces a fantastic range of dome head multigrip blind rivets. Designed to be easily installed and able to secure joints with short clamp lengths, these rivets are engineered to create a permanent mechanical fastening, they expand into a pre-drilled hole to create a strong and solid hold. The blind rivet can be installed entirely from one side of the material when access is limited to the fixing, unlike machine screws and nuts. Designed to have a wider grip range than a standard rivet these multigrip rivets are ideal to reduce inventory. The domed head is the most common and multifunctional style. Made from A2 stainless steel to ensure a high corrosion resistance to elongate the life of your rivets whilst keeping it lightweight and strong. These steel rivets have a wide grip range with excellent load spread setting and mandrel locking system. Used predominantly in white goods, electronics and HVAC and storage solutions. Features and Benefits Made from A2 stainless steel for solid rivets and structural strength Easy and clean installation Can be used where only one side of the application is accessible Increased grip range 6.5 mm ??10 mm Creates a permanent and high tensile structural rivet joint with little effort Body length 15 mm Applications Rivets are mechanical fasteners that consist of a smooth cylindrical shaft with a head on one end and tail at the opposite end to the head. On the installation, a riveter places a rivet in a pre-drilled hole, and the tail is set or bucked (i.e. deformed) with a rivet gun, rivet tool or pneumatic hammer so that it expands to about 1.5 - 2 times the original shaft diameter, holding the rivet in place. They are used to permanently join two steel, aluminium or copper plates usually in mechanical applications where it is imperative that joints do not become loose and cause failure. They are especially suited to situations where there are secondary or irregular holes with their wider grip range. Most common, everyday rivet applications include: White goods Electronics DIY General engineering HVAC Aviation, aerospace, and automotive Why RS PRO? RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards they??re only given the RS PRO seal of approval if we??re confident of their exceptional quality, which means you can be confident too.