■ 제품필수정보

제조사	RS PRO
제조사품명	OJSDS4808
간략설명	RS PRO Steel Blind Rivet, 4.8mm

■ 제품사양

Rivet
타입 = Blind Rivet Diameter = 4.8mm Rivet Length = 8mm Fixing Hole Diameter = 4.9mm Rivet Body Material = Steel Standards Met = DIN 7337 Thickness of Material Minimum = 0.5mm Thickness of Material Maximum = 3mm
색상 = Grey Grip Range Maximum = 3mm Finish = Plain RS PRO Dome Head Sealed Blind Rivet RS PRO introduces a fantastic range of dome head sealed blind rivets. Designed to be easily installed and able to secure joints with short clamp lengths, these rivets are engineered to create a permanent mechanical fastening, they expand into a pre-drilled hole to create a strong and solid hold. The blind rivet can be installed entirely from one side of the material when access is limited to the fixing, unlike machine screws and nuts. Specifically designed to provide 100% mandrel tension and eliminate any leakage of liquids and gases. The domed head is the most common and multifunctional style. Made from steel to ensure weather proofing and corrosion resistance to elongate the life of your rivets whilst keeping it lightweight and strong. These steel rivets have a wide grip range with excellent load spread setting and mandrel locking system. Used predominantly in modular buildings, portable wash facilities and plastic pallet and storage solutions. Features and Benefits Made from steel for solid rivets and structural strength Easy and clean installation Can be used where only one side of the application is accessible Increased grip range 0.5 mm ??3 mm Creates a permanent and high tensile structural rivet joint with little effort Body length 8 mm Applications Rivets are mechanical fasteners that consist of a smooth cylindrical shaft with a head on one end and tail at the opposite end to the head. On the installation, a riveter places a rivet in a pre-drilled hole, and the tail is set or bucked (i.e. deformed) with a rivet gun, rivet tool or pneumatic hammer so that it expands to about 1.5 - 2 times the original shaft diameter, holding the rivet in place. They are used to permanently join two steel, aluminium or copper plates usually in mechanical applications where it is imperative that joints do not become loose and cause failure. They are especially suited for environments where a moisture or pressure tight seal is necessary. Most common, everyday rivet applications include: Building and construction White goods Transportation and infrastructure Woodworking and decorative finishing Fine metalwork Aviation, aerospace, and automotive Why RS PRO? RS PRO is our family brand to go-to and brings you a wide range for high-quality and high-value products to support your project. Trusted by engineers all over the world, every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if we are confident of their exceptional quality, which means you can be convinced too.