■ 제품필수정보
■ 제품사양
Lead
타입 = Fused Probe Kit Connector
타입 = Right Angle Plug Fused = Yes Lead Length = 1.2m Safety Category Voltage = 600, 1000V Safety Category = CAT III 1000 V, CAT III 600V
최소 작동 온도 = -10°C
최대 작동 온도 = +150°C Safety Category Level = CAT III Right angled versions are not recommended for use with Megger BM100, BM101, Thurlby 1905, 1503, Fluke 8010, 8050, Wavetek DM25XL, DM93, DM98, AVO 8, AVO 2001 and ITT MX112 multimeters. For these models straight versions are more suitable. RS Pro Fused Test Leads 1000V CAT III. A 1.2m fused test lead set from our RS PRO range offering a high degree of protection to the user when measuring on high energy circuits up to 1000V CAT III. The leads are available with either straight 4mm plugs with retractable shroud, or with right-angled shrouded plugs. Test leads for multimeters are used to test voltage, current, capacitance and other types of testing. Supplied in a plastic wallet, this test lead kit is available with straight or right-angled 4mm plugs and is suitable for use with most multimeters and insulation testers. ; 204-583 204-583 - Fused right-angled test lead set ; 204-599 204-599 - Retractable Straight Plug Before making any voltage measurements, check the continuity of the leads to ensure that the fuses are intact. RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. ; 161-1530 161-1530. Features and Benefits :. Each lead is fitted with a 500mA 1000V 50kA HRC fuse within totally touch proof integral fuse holders High-quality silicone insulated cable, resistant to heat, chemicals, oils and abrasions, with yellow inner insulation to serve as a wear indicator Large screw-in crocodile clips with a 20mm jaw opening with integral finger guards rated 600V CATIII Strain relief is provided at each end of the leads. Also available: Thin fine insulated prods set ; 2627770 2627770 for use with fused test prods and multimeter test lead sets. Shuttered lantern probe set ; 2627786 2627786 for use with fused test prods and multimeter test lead sets. Typical applications. Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test. Test and Measurement. A 1.2m fused test lead set offering a high degree of protection to the user when measuring on high energy circuits up to 1000V CAT III. The leads are available with either straight 4mm plugs with retractable shroud, or with right angled shrouded plugs. Replacement fuses can be purchased please see RS Stock no. ; 161-1530. 161-1530. Safety Precautions. Each lead is fitted with a 500mA 1000V 50kA HRC fuse within totally touch proof integral fuse holders High quality silicone insulated cable, resistant to heat, chemicals, oils and abrasions, with yellow inner insulation to serve as a wear indicator Large screw-in crocodile clips with a 20mm jaw opening with integral finger guards rated 600V CATIII Strain relief is provided at each end of the leads. Supplied in a plastic wallet, this test lead set is available with straight or right angled 4mm plugs and is suitable for use with most multimeters and insulation testers. Thin fine insulated prods set ; 2627770 2627770 for use with fused test prods and multimeter test lead sets are also available. Shuttered lantern probe set ; 2627786 2627786 for use with fused test prods and multimeter test lead sets
