■ 제품필수정보

제조사	Schneider Electric
제조사품명	TM262L20MESE8T
간략설명	Schneider Electric M262 Logic Controller - 4 Inputs, 4 Outputs, Transistor

■ 제품사양

Manufacturer
시리즈 = M262 Number of Inputs = 4 Output
타입 = Transistor Input
타입 = Digital Supply Voltage = 24 V Number of Outputs = 4
장착형태 = Rail, Plate, Panel Depth = 90mm Schneider Electric Modicon M262 Logic Controller Forming part of the Modicon M262 range of products is this logic motion controller operates at a rated voltage of 24V DC. It has short-circuit and overload protection with automatic reset, reverse polarity protection and a manual short circuit protection.??The communication port protocols are Ethernet IP/Modbus TCP, Serial link, Modbus RTU and ASCII, HTTP and HTTPS ??7 remote and 7 local I/O expansion modules ??With a real time clock ??LED signalling ??
크기: H100mm x D90mm x W125mm ??Maximum output frequency : 300kHz ??PLC power consumption : 82W ??Backup time : 1000h at 25°C Range Information - Modicon M262 The M262 Logic/Motion Controller is a control system that offers an all-in-one solution for motion applications and a scalable solution for logic applications, with optimised configurations and an open, expandable architecture. The M262 Logic/Motion Controller has various powerful features and can service a wide range of applications. Software configuration, programming, and commissioning are accomplished with the EcoStruxure Machine Expert software version 1.1. Maximum hardware configuration can be achieved as well as local and remote configurations. Programming Languages - The M262 Logic/Motion Controller is configured and programmed with the EcoStruxure Machine Expert software, which supports the following IEC 61131-3 programming languages: ??IL: Instruction List ??ST: Structured Text ??FBD: Function Block Diagram ??SFC: Sequential Function Chart ??LD: Ladder Diagram EcoStruxure Machine Expert software can also be used to program these controllers using CFC (Continuous Function Chart) language. Power Supply - The power supply of the M262 Logic/Motion Controller is 24 Vdc Real-Time Clock - The M262 Logic/Motion Controller includes a Real-Time Clock (RTC) system. The system time is maintained by capacitors when the power is off. The time is maintained for 1 000 hours when the controller is not supplied. Run/Stop - The M262 Logic/Motion Controller can be operated externally by the following: ??A hardware Run/Stop switch ??A Run/Stop operation by a dedicated digital input, defined in the software configuration. For more information, refer to Configuration of Digital Inputs (see Modicon M262 Logic/Motion Controller, Programming Guide). ??An EcoStruxure Machine Expert software command ??The system variable PLC_W in a Relocation Table ??The Web server Memory - Three different memory types - RAM, Flash and Non-volatile RAM which suits a variant of uses and comes in different sizes Embedded Inputs/Output types - Fast inputs and fast source outputs Encoder - Incremental and SSI encoder modes available Removable Storage - The M262 Logic/Motion Controllers include an integrated SD card slot. The main uses of the SD card are: ??Initializing the controller with a new application ??Updating the controller and expansion module firmware ??Applying post configuration files to the controller ??Storing recipes, files ??Receiving data logging files Embedded Communication Features - The Modicon M262 range features embedded communication features, it has Ethernet, USB Mini-B, Serial Line and Sercos communication ports available. What is a PLC CPU? A PLC (programmable logic controller) is an industrial digital computer designed for the control of manufacturing processes or robotic devices where reliability control, simple programming and fault diagnosis is necessary. They were originally built to replace electromechanical relay systems in industrial automation. A CPU (central processing unit) forms part of the PLC system. PLC CPUs are microprocessor-based and act as the electronic circuitry within an industrial computer. They carry out instructions from the computer program, performing basic mathematical, logical, control, input and output operations.