■ 제품필수정보

제조사	INA
제조사품명	GLCTE35-XL
간략설명	2 Hole Flange Bearing Unit, GLCTE35-XL, 35mm ID

■ 제품사양

Material = Cast Iron Inside Diameter = 35mm Length = 94mm Width = 42mm Depth = 126mm Number of Mount Holes = 2 Mount Hole Size = 11.5mm Mount Hole Centre-to-Centre = 100mm INA housing units are available as plummer block, flanged and take-up housing units in numerous different designs. The units are ready-to-fit and comprise INA cast iron or sheet steel housings in which INA radial insert ball bearings are fitted. In order to ensure function and reliability under all operating conditions, the bearings and housings are matched to each other Due to the spherical outside surface of the bearing outer ring and the concave housing bore, housing units can compensate for static angular misalignment of the shaft, see link The units are used predominantly as locating bearings, but are also suitable as non-locating bearings under low loads and speeds The housings are screw mounted on the adjacent construction. Less stringent tolerances are sufficient for the screw mounting surfaces.