■ 제품필수정보

제조사	Arcol
제조사품명	508BA253KDG2
간략설명	Arcol, 25000Ω 38W Wire Wound Fixed Resistor 508BA253KDG2 ±10%

■ 제품사양

Resistance = 25000Ω Power Rating = 38W
시리즈 = 500 Package/Case = Radial Tabs Tolerance = ±10% Technology = Wire Wound Termination Style = Radial
최소 작동 온도 = -55°C
최대 작동 온도 = +230°C Minimum Temperature Coefficient = 0% Maximum Temperature Coefficient = -0.2%
크기 = 25.4 x 38.1mm
전체 길이 = 38.1mm Arcol Ceramic ResistorsHigh energy Chassis mount ceramic resistor for high peak power or high energy pulses. The resistor has a standard dielectric coating and tin plated, steel right angled radial mounting tabs. Its construction acts to allow energy and power to be uniformly distributed throughout the entire ceramic resistors body. Maximum operating temperature 230°C500
시리즈 Non-Inductive Bulk Ceramic Slab Resistors provide high power and energy dissipation in a compact size. The 500
시리즈 design enables the designer to minimize resistor package size and cost while providing performance and reliability. The slim, compact resistors offer a number of termination options allowing easy configuration for specific requirements. Ohmite 500
시리즈 non-inductive bulk ceramic slab resistors provide excellent performance where high peak power or high-energy pulses must be handled in a small size. The advantage of the bulk construction is that it produces an inherently non-inductive resistor and it allows energy and power to be uniformly distributed through the entire ceramic resistor body ??there is no film or wire to fail. Standard terminal mounting tabs are tin plated steel which are soldered to the resistor body.Inherently non-inductive, high reliability due to bulk ceramic construction 15 watts per inch of length power dissipation (type SP) Excellent pulse/overload capability Slim profile for excellent volumetric power efficiency Resistance range from 0.2 to 870K (resistance range dependent on material type) Resistance tolerances 5, 10, 20% standard on individual components, available to ±2% on assemblies DC Coupling and Filter Cap Discharge Voltage Balancing Pre-charge / Inrush Limit Voltage Divider Filter Snubber Crowbar Measuring EMI / EFI Test Circuits Test Loads