■ 제품필수정보

제조사	FAG
제조사품명	6006
간략설명	FAG 6006-C Single Row Deep Groove Ball Bearing- Open Type 30mm I.D, 55mm O.D
문서자료	https://documents.rs-online.com/techlib:/itc_doclist_GB.htm?stockno=1908395

■ 제품사양

Inside Diameter = 30mm Outside Diameter = 55mm Ball Bearing
타입 = Deep Groove Race Width = 13mm End
타입 = Open
행 수 = 1 Static Load Rating = 8000N Cage Material = Sheet Steel Race
타입 = Plain Dynamic Load Rating = 13500N Bore
타입 = Parallel High and very high speeds are required The bearing arrangement must be operated with very low friction Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C) High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C) The bearing position is to be designed particularly economically Double row bearings can be considered for bearing arrangements where: The load carrying capacity of single row deep groove ball bearings is no longer sufficient Axial loads in both directions and/or tilting moments must be supported in addition to radial loads A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small