■ 제품필수정보

제조사	FAG
제조사품명	33014
간략설명	FAG 33014 70mm I.D Taper Roller Bearing, 110mm O.D

■ 제품사양

Inside Diameter = 70mm Outside Diameter = 110mm Roller Bearing
타입 = Taper Race Width = 31mm Bore
타입 = Tapered Static Load Rating = 223000N Cage Material = Sheet Steel
행 수 = 1 Dynamic Load Rating = 136000N End
타입 = Open Fatigue Limit Load = 29500N High radial loads occur High axial loads act on one side Combined loads must be supported (radial and axial forces acting simultaneously) Precise axial guidance of the shaft is required (locating bearing function) The bearing arrangement must have very high axial rigidity The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other) High running accuracy is required The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required The bearings are not required to compensate misalignments The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity