■ 제품필수정보

제조사	FAG
제조사품명	32005-X
간략설명	FAG 32005-X 25mm I.D Taper Roller Bearing, 47mm O.D

■ 제품사양

Inside Diameter = 25mm Outside Diameter = 47mm Roller Bearing
타입 = Taper Race Width = 15mm Bore
타입 = Tapered Static Load Rating = 34000N Cage Material = Sheet Steel
행 수 = 1 Dynamic Load Rating = 31500N End
타입 = Open Fatigue Limit Load = 4800N High radial loads occur High axial loads act on one side Combined loads must be supported (radial and axial forces acting simultaneously) Precise axial guidance of the shaft is required (locating bearing function) The bearing arrangement must have very high axial rigidity The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other) High running accuracy is required The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required The bearings are not required to compensate misalignments The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity