■ 제품필수정보

제조사	FAG
제조사품명	202-XL-KRR
간략설명	FAG 202-XL-KRR Self Aligning Ball Bearing- Lip Seals On Both Sides 15mm I.D, 35mm O.D
문서자료	https://documents.rs-online.com/techlib:/itc_doclist_GB.htm?stockno=1908331

■ 제품사양

Inside Diameter = 15mm Outside Diameter = 35mm Ball Bearing
타입 = Radial Race Width = 14.4mm End
타입 = Sealed
행 수 = 1 Static Load Rating = 3700N Cage Material = Sheet Steel Race
타입 = Plain Dynamic Load Rating = 8100N Bore
타입 = Parallel Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present The outer ring of the bearings is to be located by means of easy-to-fit snap rings Radial insert ball bearings with a profiled bore are highly suitable where: Shafts must transmit very high torques Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported Damping of running noise is required