■ 제품필수정보

제조사	Volkel
제조사품명	16016 +Cal
간략설명	Volkel M5 x 0.8 Go/No Go Plug Gauge, 0.8mm Pitch Diameter, PreCal

■ 제품사양

Plug/Ring = Plug Gauge
타입 = Go/No Go Thread Size = M5 x 0.8
정점 Diameter = 0.8mm Tolerance = 6H Single or Double Ended = Double Imperial or Metric = Metric Calibrated = PreCal A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring. The go end of the thread plug gauge must screw into the thread cut into a part by hand (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap). The scrap side of the thread plug gauge must not be able to be manually turned more than two turns into the cut thread (without using excessive force). If it can be screwed in more, the thread does not meet the requested standards (=scrap). The reference temperature for parts and gauges is 20° Celsius. Calibrated at a measurement laboratory separate from VÖLKEL. Calibrated using IAC thread scanners.