■ 제품필수정보

제조사	Onsemi
제조사품명	NCV7471BDQ5R2G
간략설명	onsemi NCV7471BDQ5R2G, CAN Transceiver 1Mbps CAN, CAN FD, LIN, 36-Pin SSOP-EP

■ 제품사양

Maximum Data Rate = 1Mbps Number of Transceivers = 1 Standard Supported = CAN, CAN FD, LIN Power Down Mode = Normal, Sleep, Standby
장착형태 = Surface Mount
패키지 = SSOP-EP
핀수 = 36
크기 = 10.3 x 7.5 x 2.6mm Length = 10.3mm Width = 7.5mm
높이 = 2.6mm Maximum Operating Supply Voltage = 28 V Minimum Operating Supply Voltage = 2.5 V
최소 작동 온도 = -40 °C NCV7471B/C is a System Basis Chip (SBC) integrating functions typically found in automotive Electronic Control Units (ECUs) in the body domain. NCV7471B/C provides and monitors the low??voltage power supplies for the application microcontroller and other loads, monitors the application software via a watchdog and includes high??speed CAN/CANFD and LIN transceivers allowing the ECU to host multiple communication nodes or to act as a gateway unit. The on??chip state controller ensures safe power??up sequence and supports low??power modes with a configurable set of features including wakeup from the communication buses or by a local digital signal WU. The status of several NCV7471B/C internal blocks can be read by the microcontroller through the serial peripheral interface or can be used to generate an interrupt request.