■ 제품필수정보
제조사 |
Infineon |
제조사품명 |
S25FL256LAGBHV020 |
간략설명 |
Infineon NOR 256Mbit SPI Flash Memory 24-Pin BGA, S25FL256LAGBHV020 |
■ 제품사양
Memory Size = 256Mbit Interface
타입 = SPI
패키지 = BGA
핀수 = 24 Organisation = 32M x 8 bit
장착형태 = Surface Mount Cell
타입 = NOR Minimum Operating Supply Voltage = 2.7 V Maximum Operating Supply Voltage = 3.6 V Block Organisation = Symmetrical Length = 6mm
높이 = 0.95mm Width = 8mm
크기 = 8 x 6 x 0.95mm
시리즈 = S25FL Serial Peripheral Interface (SPI) with Multi-I/O Clock polarity and phase modes 0 and 3 Double Data Rate (DDR) option Quad peripheral Interface (QPI) option Extended Addressing: 24- or 32-bit address options Serial Command subset and footprint compatible with S25FL-A, S25FL1-K, S25FL-P, S25FL-S and S25FS-S SPI families Multi I/O Command subset and footprint compatible with S25FL-P, S25FL-S and S25FS-S SPI families Read Commands: Normal, Fast, Dual I/O, Quad I/O, DualO,QuadO, DDR Quad I/O. Modes: Burst Wrap, Continuous (XIP), QPI Serial Flash Discoverable Parameters (SFDP) for configuration information. Program Architecture 256 Bytes Page Programming buffer 3.0 V FL-L Flash Memory Program suspend and resume Erase Architecture Uniform 4 KB Sector Erase Uniform 32 KB Half Block Erase Uniform 64 KB Block Erase Chip erase Erase suspend and resume 100,000 Program/Erase Cycles, minimum 20 Year Data Retention, minimum Security features Status and Configuration Register Protection Four Security Regions of 256 bytes each outside the main Flash array Legacy Block Protection: Block range Individual and Region Protection Individual Block Lock: Volatile individual Sector/Block Pointer Region: Non-Volatile Sector/Block range Power Supply Lock-down, Password, or Permanent protection of Security Regions 2 and 3 and Pointer Region Technology 65 nm Floating Gate Technology Single Supply Voltage with CMOS I/O 2.7 V to 3.6 V Packages (all Pb-free) 8-pin SOIC 208 mil (SOC008) ??S25FL128L only WSON 5 x 6 mm (WND008) ??S25FL128L only WSON 6 x 8 mm (WNG008) ??S25FL256L only 16-pin SOIC 300 mil (SO3016) BGA-24 6 x 8 mm 5 x 5 ball (FAB024) footprint 4 x 6 ball (FAC024) footprint