■ 제품필수정보

제조사	Electromen OY
제조사품명	EM-291A
간략설명	Electromen OY DC Motor Controller, 11 ??35 V dc, 4 A, 35 V dc

■ 제품사양

Supply Voltage = 11 ??35 V dc
Current 등급 = 4 A Voltage Rating = 35 V dc EM-291A is brushless DC-motor driver for motors with hall sensor feedback. The unit has a mosfet power stage with good efficiency and it meets also todays EMC requirements. The unit has the basic digital command inputs like direction, start/stop, and analog input for speed control. Device has one NPN output for fault and overcurrent indication use. Indication output functions can be defined with parameter. The fault situations are also indicated with on-board LED.There are two control options for speed. Direct control ( open loop ) sets motor voltage in proportion to control voltage as with a standard DC-motor. Closed loop mode uses hall sensor feedback for speed control. This mode offers good speed regulation. Start and stop ramps are working in both mode. Speed adjust range, closed loop rpm range and ramps can be set with parameters. Analog input is filtered, so that also PWM signal of PLC can be used to control speed.Parameter setting can be done digitally with EM-236 interface unit or with Emen-Tool lite PC-programand EM-268 adapter. There is also an option to use iPhone with Ementool-APP and EM-326 adapter. The Parameters setting are stored into drivers nonvolatile memory .The parameter interfaces can be also used for motor current monitoring.Three phase output Speed adjustment Current limit and trip. Open/closed loop modes Settable Indication output Good efficiency Low EMC emissions DIN-rail mountable