■ 제품필수정보
제조사 |
Onsemi |
제조사품명 |
NCS20081SQ3T2G |
간략설명 |
NCS20081SQ3T2G onsemi, Operational Amplifier, Op Amp, RRIO, 1.2MHz 10 kHz, 1.8 ??5.5 V, 5-Pin SC-70 |
■ 제품사양
Amplifier
타입 = Operational Amplifier
장착형태 = Surface Mount
패키지 = SC-70 Power Supply
타입 = Single Number of Channels per Chip = 1
핀수 = 5 Typical Single Supply Voltage = 1.8 ??5.5 V Typical
이득 Bandwidth Product = 1.2MHz Output
타입 = Rail to Rail Typical Slew Rate = 0.4V/µs Maximum Operating Frequency = 10 kHz
최소 작동 온도 = -40 °C Typical Voltage
이득 = 120 dB Length = 2.2mm The NCS2008 series operational amplifiers provide rail??to??rail input and output operation, 1.2 MHz bandwidth, and are available in single, dual, and quad configurations. Rail??to??rail operation gives designers use of the entire supply voltage range while taking advantage of the 1.2 MHz bandwidth. The NCS2008 can operate on supply voltages from 1.8 to 5.5 V over a temperature range from ??0 to 125°C. At a 1.8 V supply, this device has a slew rate of 0.4 V/s while consuming only 42 μA of quiescent current per channel. Since this is a CMOS device, high input impedance and low bias currents make it ideal for interfacing to a wide variety of signal sensors. The NCS2008 devices are available in a variety of compact packages.Rail??to??Rail Input and Output Wide Supply Range: 1.8 to 5.5 V Wide Bandwidth: 1.2 MHz High Slew Rate: 0.4 V/s at VS = 1.8 V Low Supply Current: 42 μA per Channel at VS = 1.8 V Low Input Bias Current: 1 pA Typical Wide Temperature Range: ??0 to 125°C Available in a Variety of Packages These Devices are Pb??Free, Halogen Free/BFR Free Unity
이득 Buffer Battery Powered / Low Quiescent Current Applications Low Cost Current Sensing Automotive