■ 제품필수정보
제조사 |
Microchip |
제조사품명 |
MM7150-AB0 |
간략설명 |
Microchip 9-Axis Surface Mount Sensor, Module, I2C, 16-Pin |
■ 제품사양
Sensor
타입 = Accelerometer, Gyroscope, Magnetometer Number of Axis = 9
장착형태 = Surface Mount Interface
타입 = I2C
최대 주파수 Response = 400kHz Maximum Operating Supply Voltage = 3.6 V Minimum Operating Supply Voltage = 2.3 V
패키지 = Module
핀수 = 16
최대 작동 온도 = +70 °C
최소 작동 온도 = -40 °C MM7150 Motion Sensor Module. The Microchip MM7150 Motion Sensor Module is a fully integrated inertial measurement device suitable for a wide range of applications requiring motion and 3D positioning data. The module incorporates MEMS technology coupling an accelerometer, gyroscope and magnetometer with Microchip ??s SSC7150 Motion Coprocessor to provide a complete 9-axis sensor fusion solution. The form factor is a compact, single sided, 17mm x 17mm PCB which is easy to solder; ideal for embedded applications. The on-board SSC7150 Coprocessor simplifies the process of incorporating sensor fusion into products; included within the firmware are all the required algorithms to filter, compensate, calibrate and fuse the raw 9-axis data. With a simple I2C connection the host MCU can easily tap into the motion and position data. Features. Embedded SSC7150 Motion Coprocessor Integrated Bosch Accelerometer, Gyroscope and Magnetometer Low Power ??13.25mA in Active Mode Sensor Power Management Host I2C Interface Small, Single Sided PCB ??17mm x 17mm