■ 제품필수정보

제조사	Onsemi
제조사품명	NCP1077BBP100G
간략설명	onsemi, AC-DC Converter 800mA 7-Pin, PDIP NCP1077BBP100G

■ 제품사양

Maximum Input Voltage = 10 V
장착형태 = Through Hole
핀수 = 7 Maximum Output Current = 800mA
패키지 = PDIP Input Voltage Range = -0.3 ??10 V Minimum Input Voltage = -0.3 V
최대 작동 온도 = +150 °C Length = 9.37mm Width = 6.6mm
높이 = 3.43mm Output Current Range = 800 mA The NCP1077A & NCP1077B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).Up to 30W output SMPS design capability Ability to scale for efficiency or size Adjust output current protection based on output power demand Eliminate acoustic noise Eliminate Aux winding Provides more robust protection without worrying about the coupling of the aux winding Improved efficiency at light load / Improved EMI over the entire load <50mW no Load Power Consumption Better EMI Signature Over the Entire Operating Range Enhanced Protection Against too Low or too High Input Voltage