■ 제품필수정보

제조사	Microchip
제조사품명	USB3300-EZK-TR
간략설명	Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, OTG, USB 2.0, UTMI + ULPI, 3.3 V, 32-Pin QFN

■ 제품사양

Number of Transceivers = 3 Protocols Supported = OTG, USB 2.0, UTMI + ULPI Power Supply
타입 = Single ESD Protection = Yes Typical Single Supply Voltage = 3.3 V
장착형태 = Surface Mount
패키지 = QFN
핀수 = 32
크기 = 5.1 x 5.1 x 0.95mm
높이 = 0.95mm Length = 5.1mm
최대 작동 온도 = +85 °C Width = 5.1mm The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY. This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time.USB-IF Hi-Speed Latch-Up performance exceeds 150 mA ESD protection levels of ±8kV HBM without external protection devices Includes full support for the optional On-The-Go (OTG) protocol Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) Allows host to turn VBUS off to conserve battery power in OTG applications Internal 1.8 volt regulators allow operation from a single 3.3 volt supply