■ 제품필수정보

제조사	Microchip
제조사품명	KSZ8851-16MLLI
간략설명	Microchip KSZ8851-16MLLI, Ethernet Controller, 100Mbps 100BaseTX, 10BaseT, BIU, 3.3 V, 48-Pin LQFP

■ 제품사양

Physical Network
타입 = 100BaseTX, 10BaseT Host Interface = BIU Network Interface = 100BaseTX, 10BaseT Communication Mode = Full Duplex, Half Duplex Data Rate = 100Mbps Loopback Mode = Internal Standard Supported = IEEE 802.3u, IEEE 802.3x
장착형태 = Surface Mount
패키지 = LQFP
핀수 = 48 Auto-Negotiation = Yes DMA Support = Yes
일반 작동 공급 전압 = 3.3 V
크기 = 7.1 x 7.1 x 1.45mm
최소 작동 온도 = -40 °C The KSZ8851 is a single-port controller chip with a SPI or 8-/16-/32-bit non-PCI CPU interface. Available in 32-/48-/128-pin packages, the KSZ8851 is for applications requiring cost-effective, high-throughput Ethernet connectivity in traditional embedded systems with MCUs or MPUs.Integrated MAC and PHY Ethernet Controller Designed for high performance and high throughput applications Supports 10BASE-T/100BASE-TX Supports full-duplex flow control and half-duplex back pressure collision flow control Supports DMA-slave burst data read and write transfers Supports IP Header (IPv4)/TCP/UDP/ICMP checksum generation and checking Supports IPv6 TCP/UDP/ICMP checksum generation and checking Automatic 32-bit CRC generation and checking Simple SRAM-like host interface easily connects to most common embedded MCUs. Supports multiple data frames for transmit and receive without address bus and byte-enable signals Supports both Big- and Little-Endian processors