■ 제품필수정보

제조사	Microchip
제조사품명	MCP2542FD-H/SN
간략설명	Microchip MCP2542FD-H/SN, CAN Transceiver 8Mbps, 8-Pin SOIC

■ 제품사양

Maximum Data Rate = 8Mbps Number of Transceivers = 1 Maximum Supply Current = 70 mA
장착형태 = Surface Mount
패키지 = SOIC
핀수 = 8
크기 = 4.9 x 3.9 x 1.5mm Length = 4.9mm Width = 3.9mm
높이 = 1.5mm Maximum Operating Supply Voltage = 5.5 V Minimum Operating Supply Voltage = 4.5 V
최소 작동 온도 = -40 °C The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current,electromagnetic compatibility (EMC) and electrostatic discharge (ESD).Supports CAN 2.0 and CAN with Flexible Data Rate CAN FD) Physical Layer Transceiver Requirements Optimized for CAN FD at 2, 5 and 8 Mbps Operation Maximum propagation delay: 120 ns Loop delay symmetry: ±10% (2 Mbps) Wake-up on CAN activity, 3.6 μs filter time Very Low Standby Current (4 μA, typical) VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O CAN Bus Pins are Disconnected when Device is Unpowered An unpowered node or brown-out event will not load the CAN bus Device is unpowered if VDD or VIO drop below its POR level Detection of