■ 제품필수정보

제조사	4D Systems
제조사품명	uCAM-III
간략설명	4D Systems microCAM-III uCAM-III Image Sensor, 1fps, 5-Pin

■ 제품사양

시리즈 = microCAM-III Frame Rate = 1fps
장착형태 = Through Hole
핀수 = 5
크기 = 32 x 32 x 15.6mm Length = 32mm Width = 32mm
높이 = 15.6mm Maximum Operating Supply Voltage = 9 V
최대 작동 온도 = +85 °C Minimum Operating Supply Voltage = 4.5 V
최소 작동 온도 = -30 °C 4D Systems serial camera moduleThe 4D Systems uCAM-III highly integrated serial camera module attachable to any host system that requires a video camera or a JPEG compressed still camera, and is the new upgrade to the popular uCAM-II that is backwards compatible but includes some additional features. The module uses a CMOS VGA colour sensor along with a JPEG compression chip that provides a low cost and low powered camera system. The uCAM-III come in a compact form factor with a built-in lens and a 5 wire connector that provides easy access to both power and serial data. The uCAM-III ship with the 56-degree lens installed. It is used in embedded devices.Features and Benefits??5VDC nominal supply ??Additions lenses available ??Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images ??Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions ??Compact in dimensions 32mmx32mmx21mm (without lens, including header) ??Locking nut for locking focus in place ??No external DRAM required ??On-board EEPROM provides a command-based interface to the external host via TTL serial link ??On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions ??Small size, low cost and low powered camera module ??UART: up to 3.68Mbps for transferring JPEG still pictures or raw images