■ 제품필수정보

제조사	Broadcom
제조사품명	HCNW4502-500E
간략설명	Broadcom, HCNW4502-500E Optocoupler, Surface Mount, 8-Pin DIP

■ 제품사양

장착형태 = Surface Mount Maximum Forward Voltage = 1.95V Number of Channels = 1 Number of Pins = 8
패키지 = DIP Maximum Input Current = 25 mA Isolation Voltage = 5000 Vrms Logic Output = Yes Maximum Current Transfer Ratio = 24% Minimum Current Transfer Ratio = 15%
시리즈 = HCNW4502 Broadcom OptocouplerThe Broadcom optocoupler is an HCNW4502 series single-channel, high-speed optocoupler. It uses an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features and Benefits??15 kV/μs minimum common mode transient immunity at VCM is 1500V ??Available in 8-pin DIP, 400-mil, wide body packages ??Current transfer ratio is between 15% and 24% ??high-speed is 1Mb/s ??Maximum forward voltage is 1.95V ??Maximum input current is 25mA ??Open collector output ??Temperature ranges between 0°C and 70°C ??TTL compatibleApplications??Analog signal ground isolation ??Feedback element in switched mode power supplies ??high-speed logic ground isolation - TTL/TTL, TTL/CMOS, TTL/LSTTL ??High voltage insulation ??Line receivers ??Power transistor isolation in motor drives ??Replaces pulseCertifications??CSA approved ??IEC/EN/DIN EN 60747-5-5 ??UL approved