■ 제품필수정보

제조사	Phoenix Contact
제조사품명	2909884
간략설명	Phoenix Contact DIN Rail Mount Interface Relay, 24V dc Coil, SPNO

■ 제품사양

Minimum Input Voltage = 19.2V Maximum Input Voltage = 24V dc Contact Configuration = SPNO
장착형태 = DIN Rail Switching Voltage = 250V ac/dc Terminal
타입 = Screw Length = 16mm
시리즈 = RIF-1-RPT-LDP-24DC/1IC
높이 = 93mm
접촉 재료 = Silver Alloy Input Current = 18mA Number of Poles = 1 Turn Off Time = 10ms Phoenix Contact Interface Relay Module, Screw Terminal, SPDT - RIF-1-RPT-LDP-24DC/1IC - 2909884Safely couple signals between a PLC (programmable logic controller) and peripherals with this relay from Phoenix Contact. The unit is supplied ready for DIN mounting and includes a base, plug-in interference suppression module and retaining bracket for simple setup. The relay module accepts both solid and flexible conductors over a wide cross-section range. Its cabling system makes it easy to configure and wire, so connection to your control system can be done quickly. Thanks to reverse polarity protection, it wont be damaged if its outlet is wired incorrectly. This component has a narrow profile to allow for maximum packing capacity on a circuit board. Its conveniently sealed, which makes it washable. This means you can remove welding flux residue without worrying about solvents affecting the relays function. Features and Benefits ??Coil voltage of 24 V AC/DC ??Switching current of 100 mA ??Switching voltage of 250 V AC/DC ??SNPO (single pole, normally open) contact configuration ??Silver alloy contact material ??Life of 30,000,000 cycles ??1 pole ??Screw terminal type ??IP20 (ingress protection) rating for protection against solid objects up to 12 mm ??
크기 of 16 (length) x 93 (height) x 75 mm (depth) ??Operating temperature range of -40°C to +70°C