■ 제품필수정보

제조사	Omron
제조사품명	H8PS-8BP
간략설명	Omron H8PS Counter, 24 V dc

■ 제품사양

Supply Voltage = 24 V dc Count Mode = Hours Display
타입 = LCD Input
타입 = Logic
장착형태 = Flush Mount Output / Interface = Relay Digit
높이 = 11 mm
최소 작동 온도 = -10°C Omron Digital CounterThe Omron H8PS series digital counter is an LCD display electronic panel mount cam positioner. This counter is logic input, flush mounting and 8 PNP transistor output device. The counter has a voltage rating of 24VDC. It is equipped with useful functions for switching encoder rotation direction, designating the point of origin. Construction: The electrical signal of the absolute encoder is directly related to the angle of the shaft. The mechanical angular position is sensed by non-contact optical elements, therefore without wear. The output of an infrared diode is transmitted through a transparent code disc and diaphragm. The light/dark pattern is converted to an electrical signal by an array of photodiodes. The same code occurs only once per revolution. This encoder is defined as a single turn encoder. Output circuit
타입s of code Any electronic code is made out of a combination of bits. Each bit is characterised by a low (0) or high (1) signal. The combination of a series of bits is called a binary word. Several binary words make a code. Single-step code - Only one bit on the parallel output changes state at any given point in time. There is no possibility of any concurrent state changes. Single-step code is very versatile and can maintain accuracy even allowing for slight misalignments of the disc and scanning device Gray code - This is a Single-step code most absolute encoders use this code. Multiple-step codes - Natural binary code. This type of code is similar to the decimal system, except that there are only 1 and 0. Each bit, depending on its position in the binary word, has a definite value, 20 to 2n assigned.Features and BenefitsEasy to adjust using single-function keys Easy replacement of mechanical cam programmers. Coder rotation direction change is possible and easy correction at the start point Backlit liquid crystal display Front dimension is 96mm x 96mmApplicationsRobotic industryCertificationsUL approved CSA certified EMC