■ 제품필수정보

제조사	Nexperia
제조사품명	PESD1USB3SZ
간략설명	Nexperia PESD1USB3SZ, Dual-Element ESD Protection Diode, 5-Pin WLCSP

■ 제품사양

최소 항복 전압 = 6V
장착형태 = Surface Mount
패키지 = WLCSP
핀수 = 5
최대 피크 펄스 전류 = 8A ESD Protection = Yes
칩당 요소 수 = 2
최소 작동 온도 = -40 °C
크기 = 1.22 x 0.82 x 0.38mm
높이 = 0.38mm Common Mode filter for USB ports, No room for compromise, The most common camera and display interface used now for portable devices is the differential MIPI interface running at RF frequencies. To allow operation at typical GSM/3G/LTE frequencies, a strong common-mode suppression over all bands and higher harmonics is needed. At the same time, a wide differential passband is needed to keep signal integrity. Since ESD can enter through gaps in the portable device, strong ESD protection is needed to avoid damage of the electronics or re-setting the system due to ESD strikesStrong common-mode suppression > 14 dB in the range between 500 MHz and > 8 GHz Wide passband > 2 GHz, ensuring signal integrity for all MIPI frequencies ESD ruggedness > 15 kV contact, far exceeding IEC 61000-4-2 (8 kV contact) Deep snap-back for optimized SoC protection against ESD strikes Very thin package (0.5 mm max package height) All LVDS signals needing a passband up to 2 GHz