■ 제품필수정보

제조사	Power Integrations
제조사품명	LNK6779E
간략설명	Power Integrations, AC-DC Converter, 12 V dc 6-Pin, eSIP-7C LNK6779E

■ 제품사양

Maximum Input Voltage = 265 V ac Maximum Output Voltage = 12 V dc
장착형태 = Through Hole
핀수 = 6 Maximum Output Current = 2.5A
패키지 = eSIP-7C Input Voltage Range = 85 ??265 V ac Current Limit = 3.63A Minimum Input Voltage = 85 V ac
최대 작동 온도 = +150 °C Length = 10.24mm Width = 2.06mm
높이 = 8.25mm
최소 작동 온도 = -40 °C Output Current Range = Maximum of 2.5 A LinkSwitch-HP series Offline AC-DC Converters. The Power Integrations LinkSwitch-HP family of flyback power supply ICs incorporate a primary side regulated controller and high-voltage power MOSFET in a single package. These devices feature ±5% CV accuracy, selectable current limit, programmable latching or hysteretic over-voltage, under-voltage and over-temperature protection, fast AC reset, and programmable shutdown delay time. Package options: eSIP-7C package for vertical orientation with minimum PCB footprint size and simple heat sink mounting using clip or adhesive pad eSOP-12B package for low-profile surface mounted ultra-thin designs with heat transfer to PCB via exposed pad and SOURCE pins; both wave and IR reflow soldering supported eDIP-12B package for low-profile through-hole mounted ultra-thin designs with heat transfer to PCB via exposed pad or optional metal heat sink. Multi-mode control maximizes efficiency over full load range No-load consumption below 30 mW at 230 VAC >75% efficiency with 1 W input at 230 VAC >50% efficiency with 0.1 W input at 230 VAC Dramatically simplifies power supply designs Eliminates opto-coupler and all secondary control circuitry ±5% or better output voltage tolerance 132 kHz operation reduces transformer and power supply size Compensation over line limits overload power Frequency jittering reduces EMI filter cost Fully integrated soft-start for minimum start-up stress Auto-restart limits power delivery to 3% during overload faults