■ 제품필수정보

제조사	HellermannTyton
제조사품명	184-10329 HTWD-PN-80X100-PVC-G
간략설명	HellermannTyton HTWD-PN Grey Slotted Panel Trunking - Open Slot, W80 mm x D100mm, L2m, PVC

■ 제품사양

Width = 80 mm Depth = 100mm Trunking/Chain
타입 = Slotted Panel Trunking
색상 = Grey Material = PVC Length = 2m Slot
타입 = Open Fire Behaviour = Self-extinguishing
시리즈 = HTWD-PN Standards Met = DIN EN 50085, UL 94 V-0 T1E wiring ducts are used in control panels, switching systems, and especially electronic control systems.Wide slots suitable for large-diameter wires Wide fingers provide additional wire support Smooth, burr-free edges protect installers from injury and wires from damage Fingers can be removed with no sharp edges at pre-notched snap-off points Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges Raised mounting points for easily, quickly and securely fastening wire retainers and other accessories prior to cabling Wire retainers and accessories leave no protruding parts below surface of duct Duct covers are easy to mount and remove, yet hold securely even in a vertical position and under vibration Cover is flush with side of duct, allowing for tight, contiguous placement of ducts Additional retainer nub on fingers on ducts height 80 and above to prevent cables from slipping Base perforation according to DIN EN 50085Narrow slots suitable for small-diameter wires Smooth, burr-free edges protect installers from injury and wires from damage Fingers can be removed with no sharp edges at pre-notched snap-off points Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges Raised mounting points for easily and securely fastening wire retainers and other accessores prior to cabling Wire retainers and accessories leave no protruding parts below surface of duct Duct covers are easy to mount and remove, yet hold securely even in a vertical position and under vibration Cover is flush with side of duct, allowing for tight, contiguous placement of ducts Additional retainer nub on fingers on ducts height 80 and above to prevent cables from slipping Base perforation according to DIN EN 50085