상품이미지
  •  상품이미지

MPN : PicoScope 4444

Pico Technology PicoScope 4444 PC Based Oscilloscope, 20MHz, 4 Analogue Channels
  • 브랜드

    Pico Technology

  • 무원상품코드

    M010552003633

  • 타입별
    EA
  • 주문가능수량

    3

  • 최소주문수량1
  • 판매단위1
  • 제품정보
  • 배송정보
    (영업일 기준)
  • 특이사항
구매수량 :

*대량구매해택
  • 수량단가1 : 1개 ~ 2,372,763원


총금액
(VAT 별도)
  • 상품정보
  • 상품후기
  • 상품문의
  • 배송/AS안내

■ 제품필수정보

제조사 Pico Technology
제조사품명 PicoScope 4444
간략설명 Pico Technology PicoScope 4444 PC Based Oscilloscope, 20MHz, 4 Analogue Channels

■ 제품사양

Number of Analogue Channels = 4 Oscilloscope
타입 = PC Based
시리즈 = PicoScope 4000 Power Source = USB Minimum Vertical Sensitivity = 2mV/div Maximum Vertical Sensitivity = 10mV/div Sample Rate Random = 256 M Sample/s
무게 = <500g Safety Category = CAT III 1000V Picoscope 4444 High Resolution Differential USB Oscilloscope. The PicoScope 4444 and its accessories offer accurate and detailed measurement for a multitude of applications. At the heart of every PicoScope 4444 is an advanced oscilloscope that offers everything you would expect and much more, including:. Key Features. 4 fully differential high-impedance inputs. 20 MHz bandwidth. Flexible 12 and 14-bit resolution. 256 MS deep memory. Rejects common-mode noise. Interface for intelligent probes and clamps. Low-voltage probe for millivolts to 50 V. 1000 V CAT III probe for high-voltage applications. 10000 waveform circular buffer. Up to 100 000 waveforms per second update rate. Serial bus decoding. Mask limit testing. Advanced math and filtering. Measurements with statistics. Advanced digital triggering. USB 3.0 connected and powered. Typical Applications. Non-ground-referenced measurements. Safe probing of single-phase and three-phase voltages and currents. Measuring power drawn by mobile and IoT devices. Mains quality testing. SMPS design. Hybrid and electric vehicle design. Motor drives and inverters. Biomedical electronics. Measuring differential signals (CAN, balanced audio) with a single channel. Intelligent Differential Inputs. With a traditional oscilloscope probe, single-ended measurements are made between a high-impedance input and a low-impedance ground. With a differential oscilloscope, measurements are made between two high-impedance inputs, allowing measurements to be made across components and test points where neither side is grounded. Differential inputs also reject common-mode noise: noise picked up equally on both high-impedance inputs is rejected. Each of the four input channels on the PicoScope 4444 features an intelligent probe interface that detects and identifies compatible probes, and powers them where necessary. Each channel can have its own choice of voltage or current probe. Non-attenuating probes allow high-resolution, low-noise measurement of signals ranging from millivolts to ±50 V. Attenuating probes allow signals up to 1000 V CAT III to be measured. Current probes are available for currents up to 2000 A.

순번
분류
제목
작성자
날짜
데이터 없음 ...
순번
답변 상태
제목
작성자
날짜
1
신청 접수
2024-11-01
2
신청 접수
2024-10-31
3
답변 완료
2024-10-24
4
신청 접수
2024-10-21
5
신청 접수
2024-05-27
7
답변 완료
2024-05-13
8
답변 완료
2024-04-16
9
답변 완료
2023-12-08
10
답변 완료
2023-11-21
상품정보이미지