■ 제품필수정보

제조사	Telemecanique Sensors
제조사품명	XY2CE1A290
간략설명	Telemecanique Sensors XY2CE Rope Pull Switch, 70m, 2NO/2NC

■ 제품사양

Normal State Configuration = 2NO/2NC Cable Length = 70m IP Rating = IP66 Number of Poles = DPST
시리즈 = XY2CE Range = Preventa XY2 Length = 229mm Width = 105mm Depth = 142mm Housing Material = Stainless Steel Hazardous Area Certification = ATEX
최대 작동 온도 = +70°C EN/ISO 13850:2006. The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°. Telemecanique XY2CE ; XY2CB Emergency Stop Rope Pull Switches. These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking. Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended) The XY2 CE1A296 comes with a pilot light (direct supply)