■ 제품필수정보
■ 제품사양
Multimeter
타입 = Bench True RMS = Yes Absolute Maximum Resistance Measurement = 1kΩ Absolute Maximum Temperature Measurement = +400°C
최대 주파수 = 100kHz Display
타입 = Digital Model Number p = 1908 AC Current Measurement Resolution = 100nA ac Resistance Measurement Resolution = 1mΩ Temperature Measurement Resolution = 0.1°C Safety Category Voltage = 600V EN61010-1, EN61010-2-030 ; EN61010-2-033, EN61326-1 EMC. IVI driver, LV/CVI driver, USB driver. In dual measurement mode a completely independent but complementary measurement can be made and displayed on the secondary display. The two independent measurements are made alternately, not simultaneously, and the display update rate for each measurement is consequently reduced (this is not the same as dual display mode, where both a measurement and a modified version of that measurement are displayed e.g. ac Volts and the dB equivalent). Aim-TTi 1908
시리즈 Dual Measurement Bench Multimeter. Aim-TTi 1908
시리즈 is a dual measurement, dual display bench-top/portable multimeter. It features continuity and diode test, automatic or manual ranging, linear scaling with offset, dB measurements, limits comparison, percentage deviation (%), min-max storage, power measurement in watts or VA, automatic data logging and external triggering. Model 1908P can be remotely controlled via its RS232, USB, GPIB or LAN interface. Model 1908 (non ??P ?? can only be controlled via USB. Versatility. Most bench multimeters require AC power, the 1908 can operate on batteries. The batteries are charged from the internal power supply and can give more than 35 hours of operation. This enables this multimeter to be portable into locations without needing to find an AC line. The 1908 provides precision measurements, that some hand held portable multimeters may not be up to the task. Being fully portable, highly accurate, but it also has a built-in data logging for remote locations. Dual Display and Measuring. The 1908 features a main display and secondary display, used various purposes:. Displaying a measurement together with the selected range (e.g. 100 V dc). Displaying two different units of a measurement (e.g. Ac volts and dBm). Displaying the result of a calculated function (Value and % deviation). Measuring and displaying two parameters of one signal (e.g. ac and dc volts). Measuring and displaying two different signals (e.g. ac volts and dc current). Automatic data logging. The 1908 can store up to 500 readings at any required time, from one reading per second to one reading every three hours. A simple recall sequence allows the readings to be scrolled onto the display whenever required. Alternatively results can be downloaded using the remote interfaces. Safety. The 1908 has extensive protection against damage from accidental overloads on all ranges including 10 Amps. They also meet stringent safety requirements of EN61010-1 2010 and EN61010-2-030 2010 for measurements up to 300 V (Cat III), 600 V (Cat II) or 100Vdc/750Vac (for circuits isolated from AC line). Features and Benefits. Affordable 5.5 digit high performance bench/portable multimeter, 120 000 counts. Dual display (main display and secondary display) and dual measurement capability. Mains power or Internal rechargeable batteries for true portability. High accuracy and resolution 0.02%, 1 μV, 0.1 μA, 1 mΩ. Manual or Auto-ranging. True RMS AC and AC+DC measurement. DC and AC volts, DC and AC current, resistance, capacitance, frequency, and temperature measurement. Measurement post-processing. Continuity and diode checks. Two or four wire selectable ohms measurement. Display nulling and ohms null. Selectable measurement speed. Touch hold mode - holds onto a stable reading until updated. 500 point data logger with timer. Temperature measurement for PT100 or PT1000 sensors. Wide range of computing functions e.g. Ax + B. External input/output remote triggering. Closed case calibration. USB interface standard. Kensington security slot incorporated.
크기 250 x 97 x 295 mm.
무게 3.2 kg
