■ 제품필수정보

제조사	Fluke Networks
제조사품명	FTK1375
간략설명	Fluke Networks FTK1375 Single Mode & Multimode Fibre Optic Test Kit

■ 제품사양

Cable
타입 = Single Mode & Multimode Equipment
타입 = Fibre Optic Test Kit Connector
타입 = FC Port, LC Connector, LC Port, SC, ST Wavelengths = 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625nm Magnification = 200 Battery
타입 = NiMH Battery Life = 2 h Power Source = Battery, Mains
최소 작동 온도 = 0°C Fluke Networks Fibre Optic Test EquipmentThe Fluke Networks FTK1375 series fibre optic test equipment is a dirty fibre optic end faces are the major cause of problems in single-mode and multimode fibre optic systems. This test equipment is designed to simplify the inspection process. It fills the gap between a manual scope and fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time. It is supplied with 850/1300 multimode source, VisiFault VFL, FI-500 FiberInspector, FindFiberTM Remote ID source, carrying case and SC, ST and LC power meter adapters.Features and BenefitsPort Bright a built-in flashlight that illuminates dark areas and dense panels Autofocus feature for stable images in few seconds Large display to view single-mode and multimode fibre end faces Includes 4 UPC tips (LC, SC, 1.25mm and 2.50mm) The small-profile probe fits into tight spots and features push button controls for simple operation APC tips available 3.2in TFT LCD display with resolution 320 x 240 Display magnification options are 1x, 2x, 4x Display Fps is greater than or equal to 12 2 rechargeable NiMH batteries for display with rating 1.2V and 2700mAh Power adapter input rating for display is 100VAC to 240VAC ±10% at 50/60Hz with output of 6VDC and 3A Probe magnification with 200x zoom function has 1x, 2x and 4x settings Probe 5MP camera with CMOS sensor Probe field with view of 610μm x 460μm Probe resolution is 1μm Light source through LED has life greater than 100000 hours Coaxial blue LED for end face Illumination 2 white LEDs for port Illumination Power to probe is supplied through the USB interface Probe video output through USB 2.0 interfaceApplicationsMeasure and locate high loss splices Measure and locate high loss connections and breaks Locate the end of a fibre Find potential sources of errors caused by reflectance from dirty or poor connections Detect live optical signals before it begins testingCertificationsIEC 61010-1 3rd Edition IEC 62133