■ 제품필수정보

제조사	Onsemi
제조사품명	NCS5651MNTXG
간략설명	NCS5651MNTXG onsemi, Op Amp, 80MHz, 6 ??12 V, 20-Pin QFN

■ 제품사양

장착형태 = Surface Mount
패키지 = QFN Power Supply
타입 = Single Number of Channels per Chip = 2
핀수 = 20 Typical Single Supply Voltage = 6 ??12 V Typical
이득 Bandwidth Product = 80MHz
최대 작동 온도 = +125 °C Rail to Rail = No
높이 = 0.95mm NCS5651MNTXG Dual Operational Amplifier, ON Semiconductor. The NCS5651 is a high efficiency, class A/B, low distortion power line driver. It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up to 2 A peak. At the output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail, giving the user improved SNR. In addition to the output amplifier, the small-signal provided op-amp can be configured as a unity gain follower buffer or it can provide a stage of a 4-pole low pass filter. The NCS5651 offers a current limit programmable with a single resistor. The device provides also two independent thermal flags with hysteresis. The thermal warning flag shows when the internal junction temperature has reached a user programmable thermal warning threshold. The thermal error flag indicates that the internal junction temperature has exceeded 150°C. Typical applications are Power Line Communication (PLC) applications, actuators and motors drivers and any applications where a robust power amplifier is required. Features. Rail-to-Rail: drop of only +/-1 V with Lout = 1.5A Flexible 4th-Order Filtering Current-Limit Set with One Resistor Diagnostic Flags Level Shifted to VCC to Simplify Interface with External MCU Thermal Warning Flag with Flexible Threshold Setting Thermal Error flag and Shutdown - Overcurrent Flag Enable/Shutdown Control Exposed Thermal Pad